Salem Foundation Pros logoSalem Foundation ProsFoundation Repair · Salem, UT
Foundation Crack Repair photo

Salem Foundation Pros

Foundation Crack Repair in Salem, UT

Foundation crack repair with epoxy and polyurethane injection for leaking or structural cracks, free estimates available.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Salem and nearby communities.

A crack that leaks every spring isn't random. It's the high water table near Salem Pond pushing water through the path of least resistance, and freeze-thaw cycling every winter widens that path a little more each year. Salem Foundation Pros injects epoxy or polyurethane resin directly into the crack to seal it from the inside out, matching the material to whether the crack is structural or just leaking.

Not every crack needs the same fix. We check width, direction, and whether it's actively leaking before recommending epoxy for structural bonding or polyurethane for a flexible water seal.

What's included

What's Included with Foundation Crack Repair

Typically included: crack inspection and classification, surface cleaning and prep, injection port setup, epoxy or polyurethane injection, surface finishing, final watertight check.

Optional: exterior grading adjustment if surface water is feeding the crack, protective topcoat on the finished repair, interior drainage recommendation.

Customer prep: clear access to the cracked area, note how long it's been leaking and whether it's gotten worse each season.

How it works

How Our Foundation Crack Repair Process Works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack is examined to determine type, width, and likely cause.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are removed from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports are installed along the crack to control material delivery.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane is injected to fill and bond the crack.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the surface is smoothed.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The repair is checked to confirm a watertight, stable seal.

Materials

Materials and Methods for Foundation Crack Repair

Material choice depends on whether the crack is structural or primarily a water-intrusion problem.

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks rigidly, restoring strength where the crack affects the wall's load capacity.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands to fill the crack and flexes with seasonal movement, a better match for cracks that leak with spring runoff.

  • Injection Ports photo

    Injection Ports

    Spaced along the crack to deliver sealant at controlled depth rather than just surface-patching.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so injected material bonds properly instead of peeling later.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Finishes and blends the repaired surface with surrounding concrete.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the finished repair from the same moisture exposure that caused the original crack.

Timeline

How long does a Foundation Crack Repair take?

Most single-crack jobs are a same-visit repair.

  1. 01

    Inspection and classification

    same day

    .

  2. 02

    Single crack injection

    half day

    cleaning through final finish.

  3. 03

    Multi-crack jobs

    1 day

    depending on number and accessibility.

  4. 04

    Cure and watertight check

    same visit, verified before crew leaves.

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and Codes for Foundation Crack Repair

Permit needs vary by scope and severity. Confirm with Utah County or the City of Salem before scheduling work.

Typically needs a permitOften no permit
Crack repair tied to a structural reinforcement scopeStandard epoxy or polyurethane injection on non-structural cracks
such as combined with wall anchoringCosmetic surface sealing and finishing work
Repairs affecting a load-bearing foundation wall identified as structural by inspection—

DIY vs pro

DIY vs Hiring a Pro for Foundation Crack Repair

DIYHire a pro
Caulking a hairline, non-leaking surface crack for cosmetic purposes.Any crack that leaks water, since surface caulk doesn't stop water finding a path through the wall under pressure.
Monitoring a small crack over a season to see if it changes.Cracks wider than a hairline or that are growing season to season.
—Diagonal cracks above basement windows, which often indicate structural movement rather than surface shrinkage.

When to call

When to Call for Foundation Crack Repair

Call (435) 296-3927 for a free estimate before the next spring runoff pushes more water through.

  • A crack that leaks water every spring.
  • Diagonal cracking above basement windows after winter.
  • A crack that's visibly wider than it was last year.
  • Efflorescence or white mineral deposits around a crack.

Before & after

Before and After Foundation Crack Repair

  • Foundation Crack Repair photo
    Before
  • Foundation Crack Repair photo
    After

FAQs

Foundation Crack Repair FAQs

Is it normal for a foundation crack to leak water every spring?

It's common in Salem given how close the water table sits to the surface near the pond, but normal doesn't mean it should be ignored. A recurring leak means the crack is an active path for water and needs sealing from the inside, not just surface caulk.

Can I caulk a foundation crack myself or does it need a pro?

Caulk sits on the surface. Water under pressure still finds the gaps around it. Epoxy or polyurethane injection bonds through the full depth of the crack, which is what actually stops the leak.

Do I need a permit to fix a foundation crack in Utah County?

Most standalone crack injection work doesn't require a permit. If the repair is part of a larger structural scope like wall anchoring, check with the county or city building department first.

What's the difference between epoxy and polyurethane for crack injection?

Epoxy is rigid and bonds the crack for structural strength. Polyurethane expands and stays flexible, which handles water infiltration and seasonal movement better. We pick based on what the crack is actually doing.

How much does foundation crack repair cost in Salem?

Cost depends on crack width, length, and whether it's a single crack or multiple. A single hairline-to-moderate crack injection typically runs in the few-hundred to low-thousand range; we'll give you an exact number after inspection.

Next step

Get a Foundation Crack Repair Estimate in Salem

Call (435) 296-3927 or request a free estimate, we'll classify the crack and recommend the right injection material.

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 296-3927